Call (303) 770-2520

Go to…

GMC

Home / GMC

We Service and Repair all GMC cars

  • 2011 GMC Acadia

    GMC Acadia
    Mileage
    116,477
    Service Date
    6/19/2025
    Services Performed
    • CHECK AC BLOWING HOT ON PASSENGER SIDE
    • HVAC DOOR ACTUATOR – Remove & Replace – Automatic Temperature Control,Main Unit,Front,Temperature Door,Right Side – [Includes: Calibration. Includes: R&I Glove Box.]
    • EVACUATE SYSTEM AND INSTALL UV DYE. RECHARGE SYSTEM WITH REFRIGERANT AND TEST FOR PERFORMANCE AND LEAKS. NO VISIBLE LEAKS AT THIS TIME.
     
    M.B. S. gave our service a 5 star review on 6/19/2025

  • 2005 GMC Sierra

    GMC Sierra
    Mileage
    129,818
    Service Date
    5/22/2025
    Services Performed
    • CHECK CHARGING SYSTEM – INTERMITTENT BATTERY LIGHT CHECK BROKEN MIRROR CHECK INTERMITTENT ENGINE LIGHT FS OIL CHANGE
    • DOOR MIRROR – Remove & Replace – Standard Mirror,Camper Mirror,Power,One – [DOES NOT include refinishing (where applicable).]
    • INCLUDES REPLACING BELT AND PULLEYS
     
    SHARON K. gave our service a 5 star review on 5/23/2025

  • 2009 GMC Sierra

    GMC Sierra
    Mileage
    201,425
    Service Date
    5/16/2025
    Services Performed
    • CHECK A/C PERFORMANCE
    • EVACUATE SYSTEM AND INSTALL UV DYE. RECHARGE SYSTEM WITH REFRIGERANT AND TEST FOR PERFORMANCE AND LEAKS. NO VISIBLE LEAKS AT THIS TIME.
     
    DAVID S. gave our service a 5 star review on 5/16/2025

  • 2014 GMC Acadia

    GMC Acadia
    Mileage
    83,484
    Service Date
    1/8/2025
    Services Performed
    • CHECK AND REPLACE BOTH HEADLIGHTS
    • HEADLAMP BULB – Remove & Replace – Both – [Includes: R&I Fender Liner.]
     
    LORI T. gave our service a 5 star review on 1/8/2025

  • 2015 GMC Yukon

    GMC Yukon
    Mileage
    140,733
    Service Date
    11/11/2024
    Services Performed
    • UNABLE TO DUPLICATE ELECTRICAL BURNING SMELL AT THIS TIME ALL WIRES AND CONNECTIONS LOOK GOOD THERE ARE NO SYSTEM DRAWS ON CHARGING SYSTEM AT THIS TIME PULLED CODES C0397 TRANSFER CASE CLUTCH TEMP HIGH AND C0398 TRANSFER CASE RANGE ACTUATOR POSITION/RANGE POSITION CORRELATION PERFORMED TESTING ON THE RANGE SENSOR AND IT IS PASSING AT THIS TIME CLEARED CODES TWICE LIKE THE DIAG SAID TO DO AND THE 4X4 IS WORKING PROPERLY AT THIS TIME THERE IS A TSB OUT FOR HAVING THE TRANSFER CASE CONTROL MODULE UPDATED SO IT READS CORRECTLY REC TAKING TO THE DEALER
     
    BRIANA C. gave our service a 5 star review on 11/11/2024

  • 2017 GMC Sierra 2500 HD

    GMC Sierra 2500 HD
    Mileage
    71,609
    Service Date
    9/10/2024
    Services Performed
    • CODES IN SYSTEM P0740,P0741 BOTH TRANSMISSION CODES FOR TORQUE CONVERTER OR POSS VALVE BODY ISSUE REC TAKING TO TRANSMISSION SHOP
     
    STEVE L. gave our service a 5 star review on 9/12/2024

  • 2013 GMC Yukon XL

    GMC Yukon XL
    Mileage
    212,365
    Service Date
    9/8/2023
    Services Performed
    • CHECK BRAKES – GRINDING
    • REMOVE REAR CALIPERS AND PADS. MACHINE OR REPLACE ROTORS. CLEAN AND LUBE CALIPER PINS AND SLIDES. INSTALL NEW PADS, REASSEMBLE AND TEST DRIVE.
    • FLUSH AND BLEED BRAKE SYSTEM. FILL SYSTEM WITH NEW FLUID AND TEST
     
    MELISSA L. gave our service a 5 star review on 9/8/2023

  • 2007 GMC Sierra

    GMC Sierra
    Mileage
    153,014
    Service Date
    6/29/2023
    Services Performed
    • PERFORM FRONT END WORK WITH ALIGNMENT
    • BALL JOINT – Remove & Replace – 2500 HD,3500 HD,4WD Lower,Both – [DOES NOT include alignment.]
    • CONTROL ARM – Remove & Replace – Upper,One Side – [DOES NOT include alignment.]
    • FOUR WHEEL ALIGNMENT
     
    PETER K. gave our service a 5 star review on 6/30/2023

  • 2014 GMC Acadia

    GMC Acadia
    Mileage
    84,787
    Service Date
    1/18/2023
    Services Performed
    • POWER STEERING PUMP – Remove & Replace – AWD – [Includes: R&I Transfer Case Assembly. Includes: R&I Catalytic Converter.]
    • FLUSH AND BLEED BRAKE SYSTEM. FILL SYSTEM WITH NEW FLUID AND TEST
    • REMOVE FRONT PADS AND ROTORS. MACHINE OR REPLACE ROTORS. RE-PACK WHEEL BEARINGS (where applicable). INSTALL NEW PADS. CLEAN AND LUBE CALIPER PINS AND SLIDES. RE-ASSEMBLE AND TEST DRIVE.
    • REMOVE REAR CALIPERS AND PADS. MACHINE OR REPLACE ROTORS. CLEAN AND LUBE CALIPER PINS AND SLIDES. INSTALL NEW PADS, REASSEMBLE AND TEST DRIVE.
     
    TROY M. gave our service a 5 star review on 1/21/2023